All Posts By


Alpha & Twitting

By God, WordPress No Comments

So this summer we are putting on another Alpha Course. If any one wants to ask questions and find out more about christianity. Hecklers with “difficult” questions welcome.

Tweeting- i am thinking that i need to do moe dev on the site to accomodate tweets!

cool stuff of the day

By Blog, Techie No Comments

This is cubcam in elephant poo. – Click the image for more – very cool


Blowing up stuff – THE MANLY WAY


Its bee a silly couple of weeks in that we are a bit run off our feet at work. We are working on a big proposal for a client and its all hands on deck. Stress levels are not really being kept in check.

In order to keep my sanity I have been looking at techy stuff inbetween bits and pieces. Please be warned I’m about t Geek out here for a moment.

I signed up to twitter a few months back in an attempt to figure out what it was about. It was only yeasterday when i downloaded Google Desktop andadded the Twitter gadget that i realised how one should use it.

Its all about how you use it. I was trying to undestand the concept of microblogging and just couldn’t get it.  You NEED a live interface to really get the benefits of it. Without a live interface you have to keep on opening up a browser , navigate to your page and then check it. With a ljve interfae you get the updates live andcan respond to the people you follwo live. – If youstill dt get it – i dont blame you – just try looking fo a tool that suits you.

The other cool thing has been the google desktop app. It’s actually quite a good tool as it ascts as a searchbar for both yur PC and the web and its right on the desktop or its hidden depending on how you set it up. I think its a very cool lil app.

Cool stuff I have been looking at

By Techie No Comments

I’ve been looking at lots of cool futuristicy type tings….

tunage and photoage

By Tunage One Comment

touch meI’m working on sorting out my photos and music.

Over the weekend i managed to clear up my MP3 collection. Over the years i’ve managed to store my music on various different drives. They were not all the same collections either. To sort this i pulled them all onto one drive thus creating alot of duplication on top of the silly duplications i’d made.

After pulling these into iTunes it said i had 34456 MP3’s. Spme albums had du[plicated 6 imes. I had 7 copies of “The Bends”…..SEVEN!?!?!

I have now managed to whittle this down to about 7500. It was an arduous task but well worth it. Was also well wort seeing all the music i listen too and i was able to admire my own taste. Vanity at the up-most but it is my collection so I’m allowed to like it.

Now I’m in the process of sorting through Photos. When i started sorting through th photos a couple of weeks ago I had almost 25000. I’m getting rid of all the crap photos of blurriness and stuff like that. I used to have mentality of keep everything. Even blurry ones. It may come in handy. After sifting hrough over a thousand images i realized that whatever creative outlet might need blurry photos was probably capable of creating an NEW blurry photo should the need arise.

The other plan is to upload them all. There is room on this site for it s I may as well. I can create better galleries now and use the site as an online storage area for them. We will see.


I’ve realised that there seems to be alot of photo duplication and i cant seem to view my RAW images wit adobe bridge…..cretinousnous!

Laquila Earthquake – A call to prayer

By God No Comments

earlier this week in the middle of the night the people of Laquila, Italy were brutally awoken by a vicious earthquake.


The Big Picture Photos

At the time that the earthquake struck Ruth and i woke up in our beds in London. I couldn’t get back to seep and i felt the need to pray s i told ruth and we spent about 30 mins praying for the unknown.

In the morning i heard the news.

God is cool with how he can call people to pray like that.

close to the wire?

By Blog, Work No Comments


This lsat week has been quite a busy one. I feel a bit frayed and in need of a holiday. Ruth & I are planning a weeken away in May. We have got a church weekend away but that’s work for Ruth. We want a weekend to ourselves so we are gonna g down to Henley and stay in my folks caravan. After [intlink id=”1495″ type=”post”]helping dad put in the floor[/intlink] the other weekend i think its deserved that we stay there. We really are both in need of a Holiday. If anyone wants to give us an all expences paid holiday somewhere that would be ace!

So, what’s been happening this week?

BTP – On thurs and fri i was shooting with The British Transport Police. It was a grea shoot and it was facinating spending the two days in te company of coppers. They were a good fun bunch of guys to work with and we hd a good tim. The shhot itself was very strenuouse. we were all over teh place travelling to nad from various locations. Were were on the go constantly which was a major pressure but it went really well, i think it’ gonna b a really good programme.  Have a pic of me doing some directing…


Weekend – Chilltastic. Becasue ofthe arduaous previous 2 days we took it really easy over the weekend. On Fridat eve we watched ‘American History X’ which ruth hadn’t seen before and then we were in bed by about 10:30. On sat morning i woke up at my usual time and realised that i’d left my electric blnket on all night. I was bunched up agaist wifey in attempt to get away from the scolding heat. I turned it off and went back to sleep and woke again at 12:30ish. Rut did some ‘wii fit’ and i faffed on the pooter.

We wnet out fo a walk on which we got cold and rained on so we turnedit into a drive. It was nice to be out of the house. In the eve we went and had dinner with some friends at church who had invited us that morning.

Sunday morning was spent creating graphics for the new notices at church. Well its a new layout for the notices anyway. It was also a time for me to teach ruth how to do some graphics.

Monday was monday – no real news there.

Funeral – Yesterday was Alan’s (Ruth’s unofficial Uncle – its complicated) funeral. It was actually a really nice service. I got to meet the other side or Ruth’s extended family. While i didnt know any of them – it as nice to meet them and hear some stories relating to my hot sexy wife’s life.

Ruth drove home which was ace.


I am tired and drained hence feeling close to the wire…


I’m also getting fed up with thi crappy keyboard that seems to miss keystrokes at its own will!


Fie keyboard Fie!


By Arg, Rides No Comments

 crapsocksDropped the car off to the garage ths morning for it’s 12k service.

The guy called with a price…

it was big…


C R A P S O C K S !

Now We were expecting it to be about £200/300 and we had budgeted for £500 so tis was a bit of a shock. Ruth was upset when i called her – admitedly i was in shock too. That is a silly high figure.

So here i the list:

General Service charge: £155.62
Anti Freeze flush & replacment £32.80
Near side rear brake-hose £31.90
Near side Front Drop Link Ball joint £39.95
Tracking Alignment £26.38
Front Disc Brake Set £110.00
Front Disc Brake Pads £67.90
Front Wishbones £211.11
2 x Front Tyres £150.00
Rear Brake Pads £58.60

In actualfact the total came to £898ish because the mechanic had fporgotten to put someting on the lis hich attributed to the higher costing but as i spotted it he’s letting us off it.

I’ve dropped the tyres as they are within the legal limits and i did a bit of research to get some prioce comparrissons and as a result we now only have to pay around £716. But even that is still a huge amount. Dunno if the Robinsons will be goingon holiday to ireland this year after all… We will have to be faithful and hop that the Big Man provides!

The Fring – A Hijacked write-up

By Techie No Comments

The Fring

This article has been hi-jacked from : –  The article on that page did not have optimized images so the page was killing browsers accross the land. This article does not do that.


img1 - The FRING

This is a fibre-optic flash extension for your DSLR’s popup flash. Totally easy! Works great! Durable!

Designed specifically for K20D with 100 2.8 DFA lens but adaptable to other lenses (see Tamron Adaptall 90 2.5 example at the end.) Build your own!

Easy step-by-step Fring assembly instructions:

(Build and use at your OWN RISK. Don’t run with scissors. Pop-down flash before storing gear.)

Stuff  Needed

1. Go to your local dollar store (with $5 and probably a bit more for tax) and buy:


2. some balloons (black preferred)

Cable Ties

3. a bag of cable ties


4.  “groovy” fibre-optic novelty lights

toothpaste tube

5. Next, brush your teeth regularly and use up a 75 mL tube of toothpaste. Most tubes seem to be shiny inside (you need one that is shiny inside.)

6. Then go to your local bicycle shop and kindly ask for a scrap mountain bike inner-tube for a “craft” project. (Don’t try to explain – they will just give you confused looks.)

7. You need scissors and cellophane tape (other tape is likely also fine – I just had cello tape handy.)


  1. Start by taking two of the fibre-optic bundles out of their packages. Notice how there are different lengths of fibres.
  2.  index_html_m56db7cb4

  3. For the Pentax DFA Macro 100 2.8 — the shortest fibres are too short to be useful. Tightly bind the other fibres with small cable ties.
  4.  index_html_69e6a86c

  5. Holding the fibre bundle tightly, cut off the plastic plugs at the ends of the bundles.
  6. Fan the bundle out and shake over a garbage can to remove the shortest fibres (too short for the DFA 100 Macro – may be fine to keep with a different lens.)
  7.  index_html_m6d3b0e0

  8. With the DFA Macro 100 2.8, the distance from the outer edge of the lens hood to the camera body – does not change during focusing. The hood does not rotate during focusing either. Both of these facts make this build a bit easier. I have suggestions for different lenses at the end of these instructions.
  9. Remove the Hood of the DFA Macro 100 2.8 (or other lens.) Cut a section of baloon to stretch over the hood (provides grip for the fibres.)
  10.  index_html_6db59c8d

  11. Stretch the balloon over the hood (you may want to roll it up and then roll it down – prophylactic style.)
  12.  index_html_m5e4bcf8c

  13. Cut two more sections of balloon to have ready.
  14. Put the hood on the lens and the lens on the body.
  15. With the Pentax DFA 100, you will have no problem putting the base of the fibre bundle up against the pop-up flash – while fanning the ends of the fibres around the end of the hood. Try to fill in gaps. We will deal with the thinness of the fibre at the bottom of the lens later on.
  16.  index_html_6f7a1f32

  17. Use a section of balloon to anchor the fanned-out fibres around the lens hood. (Roll it up from below.)
  18.  index_html_64136dc4

  19. Using the grip provided by the outer and inner balloon ring – gently reposition fibres as needed. Perfection is not required and there may be a gap at the bottom of the hood. Fibres can cross over, it doesn’t matter. Live with some chaos. Don’t get hung-up on this part.
  20. Tape down the fibres along the edge of the balloon ring – with one layer of cello tape.
  21. Trim off excess fringe around the hood. Trim so fibres are flush with outer edge of hood. Put hood back on lens.
  22.  index_html_m603181c5

  23. Get your last fresh fibre-optic bundle. Cable-tie the tip so that the longest fibres are kept.
  24.  index_html_6609d3aa

  25. Cut plastic plug off other end of bundle. Shake in garbage can to remove other fibres.
  26. We are going to use these long fibres to improve the coverage at the bottom of the hood (where there may be a small gap.)
  27. Fan out extra fibres at bottom of hood, align end of bundle with main bundle (ending at the pop-up flash.)
  28. Repeat rubber banding, taping, and trimming of these extra fibres.
  29. Cable-tie the new bundle to the old bundle. Remove old cable ties on original bundle. Merge fibres and re-tie. It should look like this:
  30.  index_html_19dab1e6

  31. The way it is now, it can sort-of work, but there will be stray light.
  32. Wash and clean your empty tooth-paste tube and bicycle inner-tube.
  33. Cut a section of toothpaste tube to extend from behind the flash to the beginning of the fanned-out fibres.
  34.  index_html_5fe198e


  35. The reflective surface inside the tube directs the light into the fibres. A gentle curl of tube over and under the pop-up flash will hold it nicely in place.
  36. So that other photographers won’t laugh at you in the playground, finish “dressing” the Fring. Start by cutting a section of inner-tube that matches the toothpaste tube.
  37.  index_html_m2e8cbd15

  38. Fit toothpaste tube inside matching inner-tube cover. Fit over the main fibre bundle.
  39. Optional. Put a stitch right through the inner-tube and tooth paste tube covering, and the main bundle. This will prevent the covering from slipping off when you remove the lens hood. Stitch between the fanned-out part at the base of the hood and the cable ties holding the main bundle together.
  40.  index_html_m7fce94ce

  41. Put lens hood back on. Gently curl the covering of the toothpaste tube and the inner-tube over and under the flash.
  42.  index_html_m615f1a6e

  43. Stretch a section of (preferably black) balloon over the lens hood. You’re finished!
  44.  index_html_m799a399


  45. The focus ring should move freely. You can still reach the focus lock. If you want to use the flash without the Fring, just put the hood on with the fring bundle at the bottom and your pop-up flash will be unobstructed. Or buy a second hood (but that will blow the $5 budget.)
  46.  index_html_m6010e02d

You can modify this plan to work on other lenses. Here is a modified version for a classic Tamron Adaptall 90mm f2.5 with the 2x converter. The end of this lens does not rotate when focusing.


– bundle only the longest and second-longest fibres


– longest go to bottom left and right, second-longest to top left and right.


-instead of a toothpaste tube, use a more shiny and longer tube (or for greater precision, aluminized cardboard open-ended rectangular prism) – made from lid of take-out container.

– cover reflective tube with inner tube, leaving a “hood” to put over the pop-up flash.

– insert main fibre bundle into the reflective inner tube

– as you focus the lens, the fibre bundle slides inside the tube (with the Pentax 100 DFA – sliding isn’t necessary as the length of the lens doesn’t change when focused.)

I haven’t tried this – but if you are using a regular 50mm and close-up filters, or if you are using a macro lens with a lens-hood that turns during focus you could try this modification:

– use the same plan shown in step 34

– smash the glass out of an old polarizer filter (with the rotating double ring)

– thread the filter ring on your lens, put your hood on the ring, and your hood should be able to rotate as you focus (I expect you would need to do gentle manual focusing.)

– or make a contraption that allows an arm to extend below from the tripod thread and/or above from the hot-shoe to support a floating ring around the end of your lens

If the movement of the focus ring is impeded by the fibres of the Fring — build up a wider rim on your lens hood so that the fibres are further away from the barrel of the lens.

Here are some sample shots from the Classic TAMRON 90mm 2.5 lens (and the 2X dedicated converter) using the Fring:

 index_html_5ecc0f7 index_html_m533e5314

Nice even lighting. Above images are not cropped. This is a great lens (just manual focus and a bit heavy compared to the Pentax I replaced it with.) Here’s a cropped close-up of the fly picture:


Here is a small gallery of shots from the Pentax DFA Macro 100 2.8. Unless stated, no cropping has been done. Flash used in “P” mode at 200ASA equivalent setting. Hand-held (waiting for my macro rail to arrive – then will try focus-stacking.) At first glance, I think I may have had better resolution with the Tamron 90… aargh…

 index_html_58b7672b index_html_67cdc0e7 index_html_655b4765 index_html_m90c841a

Sample Images from Pentax SMC DFA 100mm 2.8 Using the Fring in the Shade

This how-to is dedicated to all the other poor souls with good intentions and too much time on their hands who have created similar DIY’s on the internet. (Many thanks to the guy who showed me how to rewire my old SF1 cable-release to work on my K20D, and to all the people sharing DIY digital projector projects. Thanks in advance to all of the people posting their macro-photography techniques — which I am looking forward to learning from.) I don’t claim that any of the ideas here are particularly original. I do think that this design is a good low-tech and low-cost macro flash solution that almost anyone can build without special tools beyond a pair of scissors. I particularly liked a brilliant “origami” cardboard ring-flash that I saw somewhere on the net. I made a more primitive version of it that worked – but was too bulky and fragile to store in my gadget bag. I think the designs on this page should have very good durability and are quite ‘crush-proof.’ This page was completed on 11 August 2008. Eventually, someone will probably make a commercial version of this plan – but I think I’ll stick with this $5 solution. This page is slow-to-load because it is one big page — I’m more interested in improving my photography than I am in improving my web-design. Hope it was worth the wait while it loaded.

work – floor – slamming

By WooYaa, Work No Comments

Work – This week has been intense! On [intlink id=”1444″ type=”post”]Paddy’s day[/intlink] I had BAA in to review an edit. The job in question had started out quite sternly as my bosses were originally managing it but now the job is mine and it’s all going smoothly. I think the client was pleasantly surprised to see how far along it is and that my suggestions on editorial changes made sense. There’s stll alot to do but it’s all good and its progressing well.

On Wed morning I had a meeting with some people at BTP (i know you are prolly wondering who they are but i am not sure if i should be stating more than the abbreviated names for confidentiality reasons). They asked us to come in for a briefing meeting and i was the lucky one to go give them our pitch which they seemed to have loved so far. Looks like next week will be another silly busy weel as a result. I then had to jump on a train to go back to Hemel to continue the finishing touches to a job we were doing for Vanderlande. The plan for the eve was to get a train back to london and tube it back to acton but i was worried about having to work really late and so i asked wifey if she’d be up for picking me up from Hemel. She was very very brave and did her first solo motorway drive and i was very proud of her. When she arrived we got a kebab and i finished up what i could then we left the office at 11:00pm.I could have just taken the camera car home but because i had the car booked in for a service in the morning i needed ruth to collect me so i could drive our car to hemel in the morning.

Friday morning had me up at 6:20am in order to get to the office to receive any later given comments from the client. At about 8:30 i went to drop the car off to the garage. When i got there they had no record of my booking!!! grrrrr! So the whole rigmarole of the previous night ended up being un-needed but it was good for Ruth to do it. The plan for the rest of this day was to upload the final versions of the programme to the web for the client and go home early. I didn’t leave till about 6pm and when i left i left the mac on uploading a couple of files and i brought home the macbook in order to upload some others from here. We did have a nice eve though. We had Dan and Suzie over for dinner. We had a really nice eve with them and ate CHILLI MMMMMM 17288

floor – Yesterday ruth and i went down to Henley with my folks. The plan was that my dad and I were going to put down the flooring for their caravan’s awning. (Rough muddy ground) + (odd bits of wood) – (appropriate tools) = a fun afternoon with my dad! It was actually all right. We had a good time doing it and we worked well together but it was knackering. I was glad to come home

slamming – We came home and i watched Ireland win the GRAND SLAM. That really was a great game of rugby. While wales were the favourites it was great to see Ireland finally pull it together for a victorious finale. Rock on IRELAND!

Tee’s – some of the best t-shirt sites out there

By Blog No Comments

Some really excellent tee-shirt sites – if you wanna buy me tshirts – these are where to begin:

Sack Wear


Yes No Maybe


A Better Tomorrow


Une boutique de T-shirts colorés qui met l’accent sur les visuels.


Turn Noctural




Assault Shirts


Snorg Tees


Here Itself


Wire & Twine


Tshirt HellWarning this is an extremeley offensive website wit Tshirts that are designed to offend. Why am i featuring it – Because even though its offensive there are spme that are down right funny. Only enter this site if you aren’t easily offended.

images thanks to fubiz